by Dynatek Labs | Dec 9, 2004 | News
Dynatek and its colleagues were the first to introduce a commercially available electromagnetically actuated mechanical tester. This device allowed for accurate high speed testing down in the sub milligram and micron ranges. This type of device is particularly useful...
by Dynatek Labs | Dec 9, 2004 | News
In the evaluation of vascular grafts and/or products that go into the vasculature, Dynatek was the first to realize that one of the most important mechanical characteristics is the dynamic internal compliance. Previously, only external measurements were taken and...
by Dynatek Labs | Dec 9, 2004 | News
Dynatek was the first to realize that the use of a thin-walled insert in a porous vascular graft could be used to replicate biological processes that normally reduce or eliminate seepage in porous grafts after implantation. Dynatek built these inserts, and after this...
by Dynatek Labs | Dec 9, 2004 | News
Dynatek was the first to introduce the concept of biologically relevant testing conditions during accelerated durability evaluations. Previously, vascular grafts and especially heart valves were tested at a variety of speeds and pressures to accelerate the failure...
by Dynatek Labs | Dec 9, 2004 | News
After more than 20 years, the M6 is still considered the international gold standard in heart valve testers. It’s hard to beat the fact that the M6 has at one time or other been used to test nearly every heart valve available for implant in the world today. Pioneer...
by Dynatek Labs | Dec 2, 2004 | News
Dynatek’s First: Commercially Available Vascular Graft Durability Tester December 2004 Twenty years ago Dynatek introduced the SVP (Small Vascular Prosthesis Tester), which quickly became the instrument of choice in most vascular graft development laboratories....
