by Dynatek Labs | Dec 10, 2004 | News
Dynatek was responsible for the first introduction of vascular mechanical models to test the performance and durability of products and devices that would be implanted into or used within the human vasculature. Dynatek now supplies models in both clear silicone as...
by Dynatek Labs | Dec 10, 2004 | News
5% to 7% dynamic internal compliance is a number that is widely used internationally to produce vascular replicates into which implantable cardiovascular products can be deployed for testing. Fifteen years ago, Dynatek presented research to the NHLBI and undertook a...
by Dynatek Labs | Dec 9, 2004 | News
High speed photographic verification was first commercially used by Dynatek to fulfill customer needs to monitor the motion of implantable products such as stents during high speed testing. The secret to this evaluation is the recently published set of protocols that...
by Dynatek Labs | Dec 9, 2004 | News
Dynatek and its colleagues were the first to introduce a commercially available electromagnetically actuated mechanical tester. This device allowed for accurate high speed testing down in the sub milligram and micron ranges. This type of device is particularly useful...
by Dynatek Labs | Dec 9, 2004 | News
In the evaluation of vascular grafts and/or products that go into the vasculature, Dynatek was the first to realize that one of the most important mechanical characteristics is the dynamic internal compliance. Previously, only external measurements were taken and...
